Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

This is a list of components to order for building bigmessowires' Floppy Emu. Obviously, in addition to this, you will need the circuit board. Gerber files for the PCB can be downloaded from bigmessowires' page.

Parts to order from Digi-Key

QuantityPart numberDescription
1ATMEGA1284P-AU-NDAVR microcontroller
1568-1582-5-NDLevel converter
1497-1242-1-ND3.3V regulator
1644-1039-1-ND20 MHz crystal
1S9172-ND20-pin floppy connector
1609-2845-NDAVR ISP connector
1A101492CT-NDSD card connector
10445-3462-1-ND0.1 uF capacitor
1445-1371-1-ND10 uF capacitor
2709-1171-1-ND18 pF capacitor
3P220ACT-ND220 ohm resistor
1RR12P10.0KDCT-ND10K ohm resistor
1A26514-40-NDBreakaway header (break into 8-pin sections)
2A26420-ND8-pin header receptacles

Parts to order from Sparkfun


Parts to order from IEC

1;L1561;6Cable to convert between DB-19 external connector on Mac and 20-pin header on Floppy Emu (recommended)
1 (optional);DB19MS;41DB-19 connector for soldering directly to Floppy Emu (not recommended)



  • None